remove carpet::In most cases the carpet will have been installed by the stretch in method remove carpet

remove carpet

remove carpet

remove carpet::In most cases the carpet will have been installed by the stretch in method.
To remove, grab a pair of pliers and snag the corner at the bottom, pulling it up at the same time.
This should free the stretch on the bottom area, allowing you to remove one section at a time.
The carpet pad will be cut into pieces and stapled to the steps and overlap the nosing.
They will be easy to pull with your hands providing not many staples were used.
Did we mention the use of gloves while doing this kind of work?
Those lil carpet tack pins are extremely sharp.
Did you ever wonder what was underneath all that carpet?
In this case the removal was quite simple.
Reasons being the installers used tack strip designed for attaching to concrete.
Our guess is they were too lazy to use the proper tack strip for wood subfloors, which happen to hold much better.
Clean the mess once again depending on who the drywall dudes were, you may find lumps all over the steps.
All of it has to be removed before the actual installation.
Any void under the hardwood will create squeaking effects eventually.
Considering we will also be gluing the plank to these steps, paint overspray has to be removed to allow a good bond with glue and wood.
Renting a flooring edger will work the quickest, but it will not get into corners that will have to be scraped by hand.
Maybe that belt sander in the garage will work?
remove carpet::These self adhesive carpet squares were inexpensive and
easy to install, and brought warmth and color to an otherwise unused
room remove carpet